Anycubic Wash and Cure Stations: Which Model Fits Your Resin Workflow?

The ANYCUBIC Wash and Cure 3 is an all-in-one desktop post-processing machine designed for hobbyists and miniature artists running standard desktop resin hardware. Compared to the older Wash & Cure 2, this model features a 42 percent increase in cleaning basket capacity, which the manufacturer notes is tailored specifically for LCD light-curing 3D printers with screen sizes of 7.3 inches or less. A key addition is the Flexicure gooseneck light, an auxiliary UV source that increases energy values by 30,000 uW/cm² within a 1 to 3-centimeter range to cure hard-to-reach areas like model undercuts, miniature garments, and recessed overhangs.

For cleaning cycles, the unit includes a double-layered polypropylene basket that supports two platform heights at 100 millimeters and 165 millimeters, accommodating printer platforms ranging from 5.9 inches to 7.3 inches. This design helps users clean prints directly on the plate while using less isopropyl alcohol. The main curing array utilizes an upgraded lens light source and bead arrangement providing a 20 percent improvement in curing uniformity over generation 2.0. Users can toggle dual modes, engage the gooseneck light, and adjust runtimes from 1 to 30 minutes with single-click controls, while a closed structural design dampens operational noise.

This model suits tabletop gamers, miniature painters, and jewelry makers who need a reliable, quiet desktop post-processing station without sacrificing bench space. However, if your printing setup includes mid-size or large-format resin machines, the 7.3-inch basket threshold will be too small, requiring a step up to the Max series.

Best for: Sculptors wanting multi-material printing with automated cleanup

Pros

• Simultaneous dual-material resin printing
• Wave release lowers detachment forces
• Includes large 15.1L Max station

Cons

• Higher complexity than single-resin workflows

Best for: Creators needing a complete 12K production setup

Pros

• Massive 18.3L 12K printer included
• Heated vat maintains 35°C resin
• Automated one-click washing and curing

Cons

• Redundant for creators who already own printers

The ANYCUBIC Photon P1 Max and Wash bundle pairs a large-scale resin 3D printer with the Wash & Cure Max 3.0 station to deliver a complete production workstation. The included printer offers an 18.3-liter build volume measuring 11.24 by 8.43 by 11.81 inches, allowing digital sculptors and prop makers to produce large single-piece models or dense batches on one build plate. Visual precision is anchored by a 14-inch 12K optical screen and the LighTurbo 3.0 engine, which the listing notes delivers a repeatable accuracy of plus or minus 0.01 millimeters to minimize visible layer lines.

To maintain print consistency in colder workshops, the printer features a 1.9-liter heated resin vat that maintains photopolymer temperatures up to 35 degrees Celsius. Calibration is handled by Auto-Leveling 3.0, which checks four corners in real time with live force feedback, while built-in artificial intelligence monitoring tracks build plate status, resin levels, bottom-layer separation, and vat residue. Once printing finishes, the included Wash & Cure Max 3.0 handles post-processing with its automated cleaning and curing cycles.

This bundled package suits commercial creators, cosplay fabricators, and prototyping labs building out a complete high-volume resin setup in one purchase. Makers who already own a reliable large-format printer do not need the redundant machine hardware and should buy a standalone Max unit instead.

Best for: Owners of medium to large resin printers

Pros

• Spacious 15.1L washing volume
• One-click auto wash and cure
• Spray cleaning saves 50% detergent

Cons

• Heavy 18.96-kilogram bench footprint

Designed to eliminate manual solvent handling for large prints, the ANYCUBIC Wash & Cure Max 3.0 provides a 15.1-liter internal liquid capacity and a spacious wash envelope of 305 by 165 by 300 millimeters. According to its specifications, this represents a 98.55 percent increase in wash volume over the Wash & Cure 3 Plus. The station accommodates models from resin 3D printers with build volumes up to 13.6 inches, including Anycubic Photon Mono series and Saturn series machines. If your workshop already relies on an Anycubic resin 3D printer, this station integrates seamlessly into that production chain.

The standout operational feature of the Max 3.0 is its automated one-click wash-and-cure routine, which scientifically sequences solvent washing and UV curing in a single uninterrupted operation. The cleaning mechanism utilizes 360-degree spray rinsing paired with bottom section agitation, allowing it to clear uncured resin from intricate cavities while reducing detergent consumption by nearly 50 percent compared to immersion tanks. Post-curing is handled by a rotating platform delivering 25,000 uW/cm² of UV energy across an 18-centimeter irradiation distance.

This automated station is ideal for busy creators and production studios tired of manually transferring wet, solvent-soaked models between separate buckets and curing chambers. Makers working on cramped desks should be aware that its 18.96-kilogram weight and expansive frame require dedicated workshop tabletop space.

The ANYCUBIC Photon P1 with Dual-Color -Material bundle pairs a multi-material resin printer with the 15.1-liter Wash & Cure 3 Max station. The Photon P1 printer is engineered for simultaneous dual-material and dual-color resin printing, giving modelers the ability to combine distinct mechanical properties or colors within a single print cycle. The listing highlights that this capability reduces initial resin waste on smaller parts, keeping material costs down when running specialized or expensive resins.

The printer’s mechanical motion relies on a solid ball screw and precision guide rails to minimize vibration and maintain consistent layer alignment. It also features Wave Release Technology, which introduces micro-airflow during plate lifting to reduce release forces by 60 percent, improving print success rates. The included Wash & Cure 3 Max provides a 305 by 165 by 300 millimeter washing envelope and one-click automatic washing and curing to process the printer’s output.

This specialized bundle is tailored for functional designers, advanced sculptors, and creative hobbyists who need multi-material or two-tone resin capabilities alongside automated large-format cleanup. For makers who only print standard monochrome prototypes, the added complexity of dual-material hardware offers little practical utility compared to standard single-resin configurations.

Best for: Wash and Cure 3 or 2.0 owners

Pros

• Authentic 45 RPM replacement turntable
• Compatible with Wash & Cure 3 and 2.0
• Includes dust cover and slip mat

Cons

• Replacement accessory only, not a station

The ANYCUBIC Wash&Cure 3 Station Curing Platform is an official replacement turntable designed to maintain the mechanical operation of desktop post-processing stations. The listing specifies that this authentic replacement platter is compatible with both the Wash and Cure 3 and the earlier Wash and Cure 2.0 machines, allowing owners of either generation to restore their equipment’s rotating curing capability.

Constructed from acrylic, metal, and plastic components, the assembly incorporates a removable platter powered by a DC motor with a maximum rotational speed of 45 RPM. The listing notes that the original accessory bundle includes a dust cover, counterweight, 45 RPM adapter, connection cables, slip mat, and a remote control, running via corded electric power. Keeping a spare curing platform on hand lets creators swap out resin-spattered surfaces or stage secondary prints for curing while another plate is in use.

This product is strictly for existing owners of the Wash and Cure 3 or 2.0 who need to replace a damaged turntable or want an extra platform. It is not an operational wash and cure station on its own and requires an existing compatible unit to function.

The ANYCUBIC Wash and Cure Max 3 is a standalone large-format post-processing unit measuring 20.4 inches deep, 20.4 inches wide, and 25 inches high with a weight of 39.5 pounds. Sized with an internal washing volume of 305 by 165 by 300 millimeters (12.01 by 6.5 by 11.81 inches), it accommodates prints from resin 3D printers with build volumes up to 13.6 inches. It combines spray rinsing with bottom immersion washing, supported by a heavy-load transmission system that accommodates a rotating wash basket capacity of up to 3 kilograms.

Solvent conservation is a major focus of the Max 3 platform. The listing details that cleaning large 25-centimeter (10-inch) prints requires approximately 4 liters of detergent, saving nearly 50 percent compared to the 8.5 liters required by traditional full-immersion wash tanks. For post-curing, the 360-degree rotating base provides 25,000 uW/cm² of ultraviolet energy across an 18-centimeter irradiation distance. Additionally, built-in intelligent monitoring tracks operational status in real time and alerts users to mechanical issues.

This standalone station is built for creators operating large-format resin machines who need an efficient, solvent-saving post-processing station capable of handling heavy 3-kilogram print loads. For small-scale tabletop miniature makers, its large footprint and multi-liter detergent capacity will exceed daily needs.