YESWELDER Stick Welder Guide: Choosing the Right Arc Rig and Electrodes

Best for: Heavy workshop stick welding and farm repair

Pros

• Dual voltage 110V and 220V
• Adjustable hot start and arc force
• Up to 205 amp output
• Runs 6010 through 7018 electrodes

Cons

• Heavier than mini stick units
• Requires 220V for maximum output

The YESWELDER 205Amp Stick Welder Digital Inverter (model ARC-205DS PRO) anchors the brand’s dedicated stick lineup. Delivering up to 205 amps of output, this unit uses an IGBT digital inverter to produce a smooth, stable arc from a rated 5 kWh power capacity. The dual-voltage design operates on standard 110-volt or 220-volt AC power. Internal copper construction ensures electrical efficiency, while built-in protections handle voltage fluctuation, overcurrent, overload, and thermal overheating. At 8.8 pounds (with listing text citing roughly 8.4 pounds) and dimensions of 15.35 by 13.07 by 7.8 inches, it packages substantial capacity into a portable chassis with a carry handle.

The ARC-205DS PRO is widely regarded as the best yeswelder for stick welding heavy plate, farm implements, and outdoor structures. Its intelligent LED display clearly presents current and operational modes, operated via a precision knob accessible with welding gloves. Operators can adjust Hot Start and Arc Force across 10 levels, preventing electrode sticking while smoothing ignition. The rig burns 6010, 6011, 6013, and 7018 rods without interruption. This YESWELDER 205Amp Stick Welder suits users requiring maximum penetration on thicker materials, giving way to the 125-amp mini model when ultra-lightweight portability on 110-volt circuits is the priority.

Best for: Ultra-portable home repairs and thin gauge projects

Pros

• Weighs just 4.4 pounds
• Standard 110V household outlet operation
• Adjustable arc force and hot start

Cons

• Limited to 125 amp maximum
• Cannot run electrodes over 1/8 inch

The YESWELDER 125Amp Mini Stick Welder IGBT (model ARC-125DS PRO) focuses on maximum portability for light repair and home DIY tasks. Operating on single-phase 110-volt AC power with a 2.8 KW wattage draw, this compact metal-cased unit provides an adjustable output range from 20 to 125 amps. It weighs just 4.4 pounds with dimensions of 7.6 by 8.6 by 12 inches (listing text notes 9.3 by 3.7 by 5.1 inches). Integrated safeguards provide automatic voltage compensation, overcurrent protection, overload protection, and thermal temperature control to maintain safe operation in compact workspaces.

Geared toward beginners and mobile fabricators, this YESWELDER 125Amp Mini Stick Welder features a bright LED screen and a control knob that allows setting adjustments without removing safety gear such as welder nation welding caps. Adjustable Hot Start and Arc Force prevent rod freeze and promote smooth arc strikes. It is optimized for E6010, E6011, E6013, and E7018 electrodes sized below 1/8 inch on thin workpieces. While ideal for quick repairs in confined spots, it gives way to the ARC-205DS PRO when thicker plate, dual voltage, or 1/8-inch rods are required.

Best for: Makers needing multi-process stick and wire capability

Pros

• 4-in-1 multi-process welding
• Dual voltage flexibility
• Synergic and manual controls

Cons

• Lift TIG torch sold separately
• Bulkier chassis than dedicated stick units

The YESWELDER 160A MIG Welder (model YWM-160) provides a 4-in-1 multi-process system combining manual Stick welding, Gas MIG, Flux Core MIG, and Lift TIG (lift TIG torch sold separately). Operating on dual-voltage 110-volt or 220-volt input with a 4.2 KW rating, it delivers up to 160 amps of DC output. The unit weighs 19.4 pounds (shipping weight listed at 27.5 pounds) with dimensions of 20.79 by 15.43 by 12.01 inches. Constructed with aluminum, copper, and iron components, it includes safeguards against voltage fluctuations, over-current, over-load, and over-heating.

For fabricators switching between stick and wire processes, the YESWELDER YWM-160 features an advanced digital LED display and Synergic smart control, which automatically pairs wire speed with recommended voltage based on material thickness. Experienced welders can switch to full manual adjustment for tailored control. The internal wire drive accepts 2-pound and 10-pound spools of 0.030-inch wire. When running stick mode, it handles general fabrication and maintenance projects. It serves makers needing wire and stick versatility, though users focused exclusively on stick welding will prefer the lighter, dedicated ARC series.

Best for: Sheet metal and light gauge general fabrication

Pros

• Operates on AC or DC current
• Easy arc striking with low spatter
• Self-cleaning vertical down slag

Cons

• Shallow penetration on thick stock
• Limited to 45A to 90A range

The YESWELDER E6013 3 32” 5LB Welding package (part number E6013-5LB-2.4) contains 5 pounds of general-purpose mild-steel stick electrodes. Each rod measures 3/32 inch in diameter and 14 inches in length, operating across a recommended amperage range of 45 to 90 amps. Engineered to run on either AC or DC current, these electrodes perform well on low-voltage AC machines and portable inverters. The boxed product weighs 5.21 pounds with package dimensions of 14.21 by 2.4 by 2.4 inches.

These YESWELDER E6013 welding rods offer all-position operation, producing low spatter, easy arc restrikes, and excellent slag removal that is virtually self-cleaning on vertical-down fillets. Engineered for shallow penetration, they are suited for sheet metal, light-gauge steel, ductwork, and joints with poor fit-up where burn-through must be avoided. They are an ideal consumable pairing for low-amperage 110-volt welders like the ARC-125DS PRO, but give way to low-hydrogen E7018 electrodes when high-strength structural penetration on heavy carbon steel is required.

Best for: Hobbyists wanting compact flux core and stick

Pros

• 3-in-1 multi-process design
• Synergic wire and voltage tuning
• Weighs only 11.4 pounds

Cons

• Single 110V voltage input
• Output limited to 135 amps

The YESWELDER 135A MIG Welder (model FLUX-135PRO) combines Gasless Flux Core MIG, manual Stick, and Lift TIG (torch required separately) into a 3-in-1 machine. Powered by single-voltage 110-volt AC, it delivers up to 135 amps of welding output. The chassis weighs 11.4 pounds (package weight 16.98 pounds) with dimensions of 14.57 by 6.10 by 8.86 inches. Built using copper, aluminum, and iron components, the welder incorporates protective circuitry against over-current, over-load, and over-heating, alongside automatic voltage compensation.

Ready to weld out of the box, the YESWELDER FLUX-135PRO includes extra spools of E71T-GS 0.030-inch and 0.035-inch flux-core wire. Its upgraded Synergic Control matches wire feed speed to recommended voltage, supplemented by a plus or minus 3-volt micro-tuning dial. An oversized LED screen monitors real-time current clearly. In stick mode, it handles mild steel sections up to 3/32 inch (2.5mm) thick. This unit suits home hobbyists wanting wire and stick capabilities on standard household outlets, though it yields to the YWM-160 for dual-voltage power and higher stick amperage.

Best for: Structural steel fabrication and high-strength repairs

Pros

• Produces high quality x-ray welds
• Steady arc with low spatter
• Excellent re-striking capability

Cons

• Requires 115A to 165A power
• Needs moisture-protected storage

The YESWELDER E7018 1 8” 5LB Welding pack (part number E7018-5LB-3.2) provides 5 pounds of low-hydrogen iron-powder stick electrodes. Sized at 1/8 inch in diameter and 14 inches in length, these rods require an operating current range of 115 to 165 amps. They operate in all positions on AC or DC reverse polarity (DCEP). The boxed package weighs 5.26 pounds with dimensions of 14.09 by 2.44 by 2.32 inches, delivering heavy-duty filler metal for high-strength steel fabrication.

Formulated for high deposition efficiency, these YESWELDER E7018 electrodes create a steady arc with low spatter and excellent re-striking capability. They produce dense, crack-resistant welds suitable for x-ray inspection on low, medium, and high carbon steels, structural frameworks, and cold-rolled steels prone to porosity. Because these 1/8-inch rods require a minimum of 115 amps, they are intended for higher-output machines such as the ARC-205DS PRO or YWM-160 running on 220 volts, and are too demanding for compact 110-volt mini welders.