6 Best Whirlpool Universal Ice Makers (2026)

As Amazon Associates, we earn from qualifying purchases. This means we may receive a small commission at no extra cost to you if you click through and make a purchase.

When maintaining a studio breakroom or busy workshop kitchen, finding the right whirlpool universal ice maker replacement is critical to preventing daily workflow disruptions. Refrigerator ice makers regularly suffer from seized drive motors, cracked plastic mold coatings, burnt heater elements, or stuck ejector blades after years of continuous ice harvesting. Creative crews and studio teams rely on constant chilled water and cold beverages during long production shoots, making a failed ice system an immediate inconvenience. Shoppers facing an unresponsive freezer unit must decide between authentic original equipment manufacturer assemblies and third-party modular alternatives, determining whether they only need a replacement freezing head or a comprehensive installation kit to get reliable ice production running again.

The Whirlpool-compatible replacement catalog is organized across four distinct mechanical layouts based on refrigerator engineering. Classic top-freezer and bottom-mount configurations rely on standardized 8-cube modular assemblies governed by a physical metal shut-off arm that rests on top of the ice pile. Modern side-by-side refrigerators with in-door ice dispensers utilize specialized, elongated 10-cube assemblies designed to feed direct gravity chutes inside the freezer door. A third category includes armless modular assemblies engineered specifically for refrigerators with electronic infrared beam sensors that monitor bin fullness optically. Finally, complete add-on kits provide the entire external plumbing and electrical infrastructure—including dual water valves, fill tubes, wiring harnesses, and storage buckets—for refrigerator cabinets that were never fitted with an ice maker at the factory.

This guide by the numbers

9.6/10

Best rated model

Our highest score in this line-up

Models on file

Models in this guide that have a stored product record

Brands involved

Distinct brand names on the product records used here

Prices and specifications come from the stored Amazon listing data for the products in this article. Scores are out of 10, based on listed specifications and buyer feedback.

Whirlpool Ice Makers Lineup at a Glance

Model	Configuration Type	Included Hardware	Key Compatibility
RIM900 Ice Maker Universal Replacement 120V	8-cube modular assembly with bail arm	Head cover, bail arm, water trough	120V modular units across Whirlpool, Kenmore, Amana, Maytag
Bare Ice Maker Fits Whirlpool WPW10190965	Bare replacement ice mold and head	Bare ice maker mechanism	WPW10190965, D7824706Q, 4317943, 1129313
Whirlpool W10873791 Genuine OEM SxS Refrigerator	10-cube side-by-side assembly with housing	Complete assembly and housing	W10760070, W10798411, W10847507, W11130444, W11646278
W10873791 Ice Maker Assembly	Aftermarket 10-cube side-by-side assembly	W10873791 assembly with control module	W10873791, W10760070, AP6026347, PS11738120
2198597 Ice Maker	8-cube armless sensor modular unit	Ice maker assembly without bail arm	2198597, W10122502, 626663, 1016069, 2198678
Whirlpool 1129313 Genuine OEM Add On	Complete add-on installation kit	Ice maker, harness, water valve, tubes, bin	30-inch, 33-inch, and 36-inch wide refrigerator cabinets

The Models in Detail

RIM900 Ice Maker Universal Replacement 120V

Best for: Breakroom fridges needing 8-cube modular replacements

Pros

Includes head cover and bail arm
Direct fit for major brands
Wear-resistant thermoplastic housing

Cons

Wiring harness not included
Requires transferring mounting hardware

The RIM900 Ice Maker Universal Replacement 120V is an 8-cube modular replacement built to restore automated ice production in traditional household and office refrigerators. Constructed with a sturdy thermoplastic housing and metal interior mold components, this 185-watt unit addresses widespread mechanical faults including persistent water leakage, grinding gear noises, misshapen ice cubes, and complete ice ejection failure. The listing documents extensive compatibility across major brands, fitting specific cabinet models like the ABB2527DEB14, ABC2037DPS, 7GJ5FSAXVY00, and 36538(P1121904WL). It operates on standard 115-volt to 120-volt alternating current and provides a rated storage capacity of two pounds.

Serving as a modular ice maker for whirlpool refrigerator models, this unit ships as a complete mechanical core that includes the front motor head cover, the metal shut-off bail arm, and the rear water fill trough. However, the listing explicitly specifies that the wiring harness is not included. Installers must disconnect power, remove the old unit, and transfer the existing refrigerator wiring harness and mounting brackets to the new chassis. Maintaining a level orientation during mounting is necessary to ensure the water trough fills evenly and cubes release cleanly during the harvest rotation.

This model is best suited for studio creators, office managers, and DIY homeowners who already have a functional wiring harness and mounting frame in an older top-mount or bottom-mount refrigerator. It gives way to the Bare Ice Maker Fits Whirlpool WPW10190965 when technicians prefer a bare-bones mechanical block without an attached bail arm or water trough for custom component swaps.

Bare Ice Maker Fits Whirlpool WPW10190965

Best for: DIY maintainers reusing existing freezer hardware

Pros

Direct replacement for D7824706Q
Durable metal and plastic mold
Automatic freeze and eject cycle

Cons

Bare assembly with no accessories
No shut-off arm included

The Bare Ice Maker Fits Whirlpool WPW10190965 provides a focused mechanical core manufactured by ClimaTek for direct appliance repairs. Operating on standard 115-volt power, this assembly connects to the refrigerator water inlet valve, captures water inside the metal and plastic mold, holds it until frozen solid, and automatically ejects the ice before refilling. The listing confirms direct interchangeability with original equipment part numbers D7824706Q, 4317943, 61005508, 67001263, and 1129313, supporting Whirlpool, Roper, and Estate refrigeration platforms.

Because this listing supplies a bare replacement assembly, it includes only the core ice maker mechanism without peripheral accessories, wiring harnesses, or extra brackets. It is tailored for repair situations where the existing refrigerator electrical harness, fill cup, and shut-off bail arm remain in sound mechanical condition. When studios manage long editing sessions and hot equipment rooms, keeping a primary refrigerator ice maker functioning eliminates the footprint and maintenance overhead of running a separate euhomy countertop ice maker on limited studio counter space.

This bare configuration suits experienced hobbyists and appliance maintainers who want an economical repair part and do not require duplicate mounting screws, wiring pigtails, or plastic chutes. It gives way to the Whirlpool W10873791 Genuine OEM SxS Refrigerator when repairing modern side-by-side refrigerators that require an integrated 10-cube in-door dispenser housing.

Whirlpool W10873791 Genuine OEM SxS Refrigerator

Best for: Side-by-side refrigerators requiring certified OEM parts

Pros

Genuine Whirlpool factory engineering
Includes complete housing assembly
One-year factory warranty

Cons

Requires novice repair disassembly
Limited to side-by-side models

The Whirlpool W10873791 Genuine OEM SxS Refrigerator ice maker assembly is an authentic factory-engineered replacement part designed specifically for side-by-side refrigerators equipped with in-door ice and water dispensers. Weighing 1.43 pounds and measuring 7.44 by 14.44 by 7.38 inches, this 10-cube replacement ice maker includes the full housing and complete assembly. The listing notes that it directly replaces part numbers W10760070, W10798411, W10847507, W11130444, and W11646278, and fits verified Whirlpool appliance models including WRS571CIHZ, WRS588FIHZ, WRS555SIHZ, KRSC703HPS, and WRS588FIHV.

Because it is a genuine Whirlpool factory part, this component is crafted to meet original engineering standards and comes backed by a one-year warranty. The listing states that installing the part requires basic hand tools, novice repair experience, and some disassembly of the refrigerator freezer compartment. Disconnecting the refrigerator from electrical power or tripping the household circuit breaker is required before starting the replacement process to ensure complete safety.

This factory unit suits studio managers, homeowners, and commercial facility coordinators who require guaranteed OEM fitment, original factory materials, and warranty backing for their side-by-side refrigerators. It gives way to the aftermarket W10873791 Ice Maker Assembly for users seeking an alternative replacement with identical form factor dimensions and plug-and-play installation.

W10873791 Ice Maker Assembly

Best for: Fast plug-and-play side-by-side dispenser repairs

Pros

Simple two to three screw installation
Food-grade ice tray material
Integrated electronic control module

Cons

Six-month warranty coverage
Incompatible with top-freezer layouts

The W10873791 Ice Maker Assembly from GZHUISU offers an aftermarket replacement option for Whirlpool, KitchenAid, and Maytag side-by-side refrigerators. Rated for standard 120-volt household current, this assembly features food-grade ice trays and an integrated electronic control module. The listing notes that it resolves common operational issues including small or cloudy ice cubes, intermittent water leaks, and frozen ejector mechanisms. It replaces manufacturer part numbers W10873791, W10760070, W10798411, W11130444, W11646278, AP6026347, and PS11738120.

Designed for straightforward DIY installation, the unit measures 15 inches deep, 4 inches wide, and 4 inches high with a one-quart capacity. The listing states that replacement requires only disconnecting the power and water supply, opening the freezer compartment, removing two to three mounting screws from the old assembly, sliding the new module into place, and reconnecting electrical power without professional technician assistance. The manufacturer backs this assembly with a six-month warranty against defects.

This replacement suits studio maintenance staff and budget-focused property operators looking for a rapid, direct-fit replacement for side-by-side dispenser setups. However, when working on older refrigerators that utilize an armless sensor configuration rather than a side-by-side door housing, this unit gives way to the 2198597 Ice Maker.

2198597 Ice Maker

Best for: Sensor-controlled refrigerators without mechanical arms

Pros

Engineered for optical sensor systems
Efficient 185-watt 8-cube harvest
Food-grade hygienic construction

Cons

No lifting arm included
Incompatible with arm-governed freezers

The 2198597 Ice Maker from Nurfosttek is a dedicated replacement unit engineered for refrigerators that govern ice harvesting via infrared sensor beams rather than mechanical shut-off arms. Drawing 185 watts on a 115-volt, 60-hertz electrical line, this modular unit produces 8 ice cubes per cycle with a one-liter capacity and utilizes food-grade materials. The listing highlights compatibility with mainstream brands including Whirlpool, Maytag, KitchenAid, Amana, and Roper, fitting over 100 specific models such as JCB2488MTR00, JCB2581WES00, and JCD2395WES00 while replacing part numbers W10122502, 626663, 1016069, and 2198678.

A crucial detail specified in the listing is that this product does not come with a lifting bail arm and must be used in conjunction with existing freezer cabinet optical sensors. It directly resolves persistent malfunctions such as abnormal ice cube formation, harvest motor noise, water leaks, and total ice production stoppage. In production spaces where catering demands exceed built-in freezer output, teams often install a high-output coolake commercial ice maker for event days, yet maintaining the primary breakroom refrigerator ice maker ensures everyday convenience for routine crew refreshments.

This model is the ideal match for Whirlpool and Maytag refrigerator owners whose freezers are factory-equipped with optical beam sensors. Because it lacks a shut-off bail arm, it cannot be used in freezers requiring a mechanical lever. In situations where an entire refrigerator cabinet lacks ice-making capability altogether, it gives way to the Whirlpool 1129313 Genuine OEM Add On.

Whirlpool 1129313 Genuine OEM Add On

Best for: Refrigerators lacking factory-installed ice makers

Pros

Complete kit with valve and harness
Includes ice bin and fill tubes
Fits 30 to 36-inch cabinets

Cons

Higher installation complexity
Unnecessary if only replacing a head

The Whirlpool 1129313 Genuine OEM Add On kit provides a factory-engineered solution designed to add automated ice making to refrigerators manufactured without an ice maker installed. Engineered for refrigerator models featuring 30-inch, 33-inch, and 36-inch wide cabinets, this comprehensive 3-pound kit replaces historic part numbers including 1105298, 1114185, 1118554, 1129312, 1129313VP, 2290, 8050, 940556, AH317558, and the ECK-MF series.

Unlike standalone replacement heads, the listing specifies that this authentic OEM kit includes a complete wiring harness, water fill tubes, a dual-solenoid water valve, an ice storage bin, mounting hardware, and installation instructions. This all-inclusive packaging allows facility coordinators to retrofit compatible Whirlpool refrigerators from scratch without purchasing ancillary plumbing components. During long commercial video shoots and summer projects, having abundant ice available for beverages or specialty equipment like an icee slushie machine keeps crew energy high throughout demanding production schedules.

This add-on kit is best for facility managers, studio teams, and homeowners seeking to upgrade a base-model Whirlpool refrigerator that has never had an ice maker, or those undertaking a complete overhaul of compromised plumbing and electrical lines. It gives way to modular assemblies like the RIM900 Ice Maker Universal Replacement 120V when the existing water valve, wiring, and storage bin are already in place and only the ice maker head needs renewal.

Matching a Model to Your Setup

For standard top-mount or bottom-freezer refrigerators with an existing wiring harness that need an 8-cube modular replacement with an attached bail arm, choose the RIM900 Ice Maker Universal Replacement 120V.
When your existing wire harness, mounting brackets, and shut-off bail arm are in good working condition and you only need a bare mechanical core, select the Bare Ice Maker Fits Whirlpool WPW10190965.
For Whirlpool side-by-side refrigerators with in-door ice dispensers requiring genuine factory parts and a one-year warranty, install the Whirlpool W10873791 Genuine OEM SxS Refrigerator.
If you need an aftermarket direct-fit 10-cube replacement for side-by-side models that installs with two to three screws, choose the W10873791 Ice Maker Assembly.
When your refrigerator utilizes optical infrared beam sensors to detect ice levels instead of a mechanical shut-off arm, install the 2198597 Ice Maker.
For refrigerator cabinets measuring 30, 33, or 36 inches that have no existing ice maker and require a complete setup with valves, tubes, and a storage bin, choose the Whirlpool 1129313 Genuine OEM Add On.

Before You Buy

Before purchasing a replacement ice maker, inspect the interior of your freezer compartment to identify the exact wiring harness, mounting bracket, and shut-off mechanism currently in place. Several modular assemblies, including the RIM900 and the ClimaTek bare unit, explicitly omit the wiring harness, requiring you to salvage and transfer the original electrical lead from your defective unit. Furthermore, the listings for standalone replacement heads do not specify the inclusion of external household water supply tubing or saddle valves, meaning you must ensure your existing water line and shutoff valve are intact, clean, and free of mineral clogging before undertaking an installation.

It is equally important to confirm whether your refrigerator uses a mechanical bail arm or optical beam sensors to regulate ice production. Installing an armless assembly like the Nurfosttek 2198597 into a freezer configured for a mechanical shut-off lever will result in continuous cycling and bin overflow, while installing a bail-arm model in a sensor-driven cavity may physically jam the storage compartment. Additionally, the listings do not specify exact cycle durations or operational noise levels, as freezing and harvesting rates depend heavily on household water pressure, internal freezer thermostat settings, and ambient room temperatures.

FAQ

How do I know which whirlpool ice maker to buy for my refrigerator?

To determine the correct replacement, find your refrigerator model number on the cabinet interior label and check the design of your current ice maker. Side-by-side models with in-door dispensers require 10-cube assemblies matching part number W10873791. Traditional top-mount or bottom-mount freezers with a mechanical shut-off lever use modular 8-cube assemblies like the RIM900 or WPW10190965. Refrigerators with optical sensor level detection require armless models like the 2198597, while empty cabinets without plumbing require an all-inclusive add-on kit like the 1129313.

What is the difference between an OEM assembly and a universal ice maker for whirlpool refrigerator models?

Genuine OEM assemblies, such as the Whirlpool W10873791 and 1129313 kit, are manufactured directly by Whirlpool to match original factory engineering specifications and typically include a manufacturer warranty. Universal aftermarket replacements, such as the RIM900, ClimaTek WPW10190965, and GZHUISU W10873791, are manufactured by third-party brands to replicate OEM dimensions and electrical connections across multiple refrigerator labels. Universal models offer functional drop-in compatibility for common repairs, while OEM units provide original factory fitment.

Does the W10873791 ice maker assembly work in any freezer layout?

No, the W10873791 ice maker assembly is engineered specifically for side-by-side refrigerators with in-door dispenser systems and select compatible French door models. Its narrow 10-cube mold dimensions and mounting bracket layout are tailored to feed ice directly into vertical door chutes. It cannot be mounted into conventional top-freezer or bottom-freezer compartments that use wide horizontal 8-cube modular assemblies.

Why does the 2198597 ice maker not include a bail arm?

The 2198597 ice maker is designed exclusively for refrigerator systems that monitor ice bin capacity using electronic infrared sensors or optical emitter boards. In these freezers, the control system automatically halts the harvest cycle when the ice stack blocks the optical beam. A mechanical bail arm is not required for these setups and would physically obstruct the sensor pathway inside the freezer compartment.

What components are included in a complete whirlpool ice maker kit?

A complete add-on kit, such as the Whirlpool 1129313 Genuine OEM Add On, includes all the hardware needed to install automatic ice production in a refrigerator that did not come with an ice maker. According to the listing, the kit contains the ice maker assembly, a full wiring harness, water fill tubes, a dual-solenoid water valve, an ice storage bin, mounting hardware, and installation instructions. Standalone replacement heads, by contrast, contain only the mechanical ice maker body.

Prices and specifications on this page are read from the Amazon product listing and can change at any time. Scores are out of 10, based on listed specifications and buyer feedback. Nobody here handled or tested these products.