As Amazon Associates, we earn from qualifying purchases. This means we may receive a small commission at no extra cost to you if you click through and make a purchase.
Choosing the right simpli safe door sensors setup comes down to your studio layout, whether silent notifications or audible chimes match your production workflow, and how often gear arrangements shift. Content creators, vloggers, and audio engineers frequently house thousands of dollars in cameras, lenses, and editing hardware. Selecting the right sensor setup requires balancing bundled multi-packs against standalone units to safeguard gear without disrupting recording sessions.
SimpliSafe organizes its entry sensor catalog primarily around core contact monitors, available as single units or grouped into bundles like a simplisafe entry sensor pack of 4. Shoppers will also find certified renewed hardware that delivers modern generation performance while conserving equipment funds. Additionally, specialized replacement adhesive pads solve repositioning challenges when reorganizing acoustic foam or relocating production spaces. When planning studio defense, reading a simplisafe entry sensors guide helps integrate these door monitors into a comprehensive security perimeter.
This guide by the numbers
4.8/5
Best rated model
Highest buyer average in this line-up, as left by Amazon shoppers
6
Models on file
Models in this guide that have a stored product record
2
Brands involved
Distinct brand names on the product records used here
Figures come from the stored Amazon listing data for the products in this article. Ratings are buyer averages, not scores given by this site.
SimpliSafe Door Sensors Lineup at a Glance
| Listing Model | Quantity | Condition | Key Specification |
|---|---|---|---|
| SimpliSafe Entry Sensor (4-Pack) | 4 Sensors | New | 1000-ft range, 6V DC battery, screw or adhesive mounting |
| SimpliSafe Entry Sensor (Single) | 1 Sensor | New | 1000-ft range, lithium battery, 0.12-inch profile width |
| SimpliSafe Entry Sensor (Renewed Single) | 1 Sensor | Amazon Renewed | 2-inch magnet sensing distance, keypad setup, screws included |
| SimpliSafe Entry Sensor (Wall Mount) | 1 Sensor | New | Lithium battery powered, contact sensor, 3 x 1.25 x 3 inches |
| SimpliSafe Entry Sensor (Renewed 4-Pack) | 4 Sensors | Amazon Renewed | Binary open-closed status, 2-inch magnet gap, 90-day warranty |
| Replacement Adhesive Pads for SimpliSafe Entry | 24 Pads (12 pairs) | New Accessory | Pre-cut PE foam, residue-free removal, blue backing |
The Models in Detail
01
SimpliSafe Entry Sensor
Best for: Producers outfitting four studio access points economically
Pros
- Four renewed contact sensors
- Two-inch magnet sensing distance
- Keypad pairing right out of box
- Ninety-day limited warranty coverage
Cons
- Refurbished pre-owned inventory
SimpliSafe Entry Sensor
Best for: Creators needing an individual replacement contact unit
Pros
- Pre-installed lithium battery
- Compact three-inch wall mount design
- Remote control method integration
Cons
- Listing states one-foot maximum range
- Minimal documentation in listing
SimpliSafe Entry Sensor
Best for: Budget-conscious creators needing one renewed sensor
Pros
- Generous two-inch magnet sensing distance
- Pre-installed battery and adhesive tape
- Includes mounting plate and two screws
- Backed by Amazon Renewed Guarantee
Cons
- Pre-owned refurbished condition
SimpliSafe Entry Sensor
Best for: Solo creators protecting a single studio door
Pros
- Includes lithium metal battery
- Discreet phone Secret Alerts
- Up to 1000-foot wireless range
- Compact 0.12-inch profile width
Cons
- Single sensor only
SimpliSafe Entry Sensor
Best for: Multi-entry studio facilities securing several access points
Pros
- Four-sensor bundle
- 1000-foot maximum wireless range
- Secret Alerts phone notifications
- Screw and adhesive mounting options
Cons
- Requires Gen 3 base station
Securing a production workspace often requires covering several doorways, windows, and equipment closets at once. The four-pack bundle of the SimpliSafe Entry Sensor provides dedicated simplisafe window and door protection for multi-room studios. With compact dimensions of 0.12 by 2 by 2.7 inches, each unit mounts neatly alongside narrow door casings and acoustic foam panels. It connects wirelessly to Gen 3 systems with an operating range up to 1000 feet, reliably bridging distances across studio warehouses and multi-room workshops.
For daily production workflows, this bundle supports both audible chime notifications and silent monitoring. The listing notes that the Base Station chimes or announces which door opens. When recording audio or streaming live, creators can enable customizable simplisafe door sensor secret alerts to bypass sirens completely, sending quiet push alerts directly to a phone, laptop, or tablet. This allows you to monitor private gear cabinets silently while microphones remain live.
Setup is simple with pre-installed 6-volt direct current batteries and mounting options using adhesive strips or included screws. This four-pack suits studio operators managing multiple edit bays or vocal booths who need fresh hardware immediately. If your facility only has one entryway, however, this package leaves surplus sensors behind, making an individual unit more practical.
02
SimpliSafe Entry Sensor
For creators operating out of a single editing suite or dedicated vocal booth, buying multi-packs is unnecessary. The individual SimpliSafe Entry Sensor provides the same perimeter detection in a standalone package. Listed as a simplisafe contact sensor gen 3 device measuring 2 by 0.12 by 2.7 inches, its white housing blends cleanly into studio doorframes. Powered by an included lithium metal battery, it maintains wireless communication with your Base Station up to 1000 feet away.
This model supports door or wall mounting via adhesive strips or mounting screws. It integrates with remote control features and provides instant chimes or silent secret alerts sent straight to your phone. This lets you track access to valuable hard drive safes without triggering disruptive sirens during video rendering. Pairing this threshold sensor with a simply safe door lock comparison gives creators complete awareness over who accesses the production room.
This standalone unit suits solo vloggers and podcasters needing to protect a single door or gear closet. It provides an immediate security barrier without excess sensors cluttering drawers. If your facility expands to include several sound booths and exterior windows, this single sensor gives way to a larger multi-pack.
03
SimpliSafe Entry Sensor
Budget-conscious video editors often look to stretch production funds across camera glass and lighting while keeping spaces secure. The Amazon Renewed SimpliSafe Entry Sensor offers an inspected single unit that performs like new. The listing confirms that Amazon-qualified suppliers test and clean each pre-owned unit, backing it with the Amazon Renewed Guarantee for replacement or refund.
Carrying model number 456049, this surface-mount digital sensor measures 2 by 0.12 by 2.7 inches and pairs with new-generation SimpliSafe systems. Crucially, the listing highlights a 2-inch magnet sensing distance, allowing the magnet to rest up to two inches from the sensor. This wider tolerance accommodates uneven studio door trim or thick soundproofing seals. The unit arrives ready to install with pre-installed batteries, adhesive, two screws, and a mounting plate.
Pairing is simple via your system keypad by choosing the add device option, with support for up to 100 sensors on modern base stations. This model suits independent creators needing an economical sensor for a sound booth door. If you manage multiple rooms or demand factory-sealed retail packaging, however, a new four-pack is the better choice.
04
SimpliSafe Entry Sensor
Certain studio doors and storage areas feature wide molding or heavier frames where an alternative casing profile fits best. This standalone SimpliSafe Entry Sensor listing describes a wall-mount contact unit measuring 3 by 1.25 by 3 inches in a clean white finish. Powered by an included lithium metal battery, it connects to SimpliSafe security system components via remote control integration.
Unlike the 1000-foot models, this listing notes a maximum range specification of 1 foot. While contact sensors detect magnetic separation across physical openings, creators should install this sensor close to system components as indicated in the listing specs. It secures doors or equipment lockers effectively, transmitting open and closed states. Combining door sensors like this with a simply safe motion sensor comparison reinforces your overall studio perimeter defense.
This sensor suits hobbyists needing a 3-inch profile to fit wider mounting footprints on studio cabinets or sliding doors. If your setup spans a wide studio layout requiring long wireless transmission to the Base Station, you should choose a 1000-foot Gen 3 model instead.
05
SimpliSafe Entry Sensor
Outfitting an entire studio complex or multi-room production company can quickly inflate operational expenses. The renewed four-pack of the SimpliSafe Entry Sensor offers an economical bulk solution. Backed by the Amazon Renewed Guarantee with a 90-day limited warranty, each pre-owned sensor is professionally inspected and tested by Amazon-qualified suppliers to ensure full functionality.
Listed under model 656942082170, these door-mounted contact sensors report binary open-closed states to provide continuous simplisafe entry sensor renewed protection. The magnet operates up to 2 inches from the sensor body, giving creators mounting flexibility around acoustic seals, heavy sound blankets, and uneven doorframes. Setup is completed via the keypad add device function, and each unit arrives with pre-installed batteries and fresh adhesive backing.
Upon opening, the sensors trigger base station chimes to announce visiting clients or crew members entering production areas. This four-pack suits commercial video creators and podcast networks needing multi-door coverage on a sensible budget. If you only need to protect one doorway, an individual sensor is a cleaner match.
06
Replacement Adhesive Pads for SimpliSafe Entry
Best for: Renting creators relocating equipment or repositioning sensors
Pros
- Twenty-four total pre-cut PE foam pads
- Twelve sensor and twelve magnet strips
- Residue-free removal for studio walls
- No cutting or trimming required
Cons
- Adhesive pads only without sensors
Creators frequently rearrange studio soundproofing, build new set backdrops, or move between leased studio spaces. The Replacement Adhesive Pads for SimpliSafe Entry by Crvicv provides a dedicated mounting solution for repositioning entry sensors and magnets. This value pack includes 24 pre-cut pads, comprising 12 sensor strips and 12 magnet strips.
Made from durable PE foam, these pre-cut pads require no scissors or trimming. The listing highlights a custom fit for SimpliSafe hardware, delivering a strong simplisafe entry sensor adhesive bond even in warm, gear-filled studio rooms. Crucially for renters, the adhesive provides residue-free removal, allowing you to unmount sensors without tearing drywall paper, stripping paint, or leaving sticky residue behind.
This pack suits mobile vloggers, apartment creators, and studio renters who regularly adjust equipment layouts. Because it contains only adhesive foam pads, it does not detect door openings independently. It is built strictly to support and remount your existing SimpliSafe sensor units whenever studio configurations shift.
Matching a Model to Your Setup
- A multi-room production studio with a control room, vocal booth, gear closet, and exterior entry benefits most from the SimpliSafe Entry Sensor four-pack, delivering full coverage and 1000-foot wireless range across expansive creator facilities.
- A solo vlogger running an editing workstation from a single room should choose the standalone SimpliSafe Entry Sensor to secure their primary threshold with discreet chimes and secret alert support.
- A budget-focused podcaster mounting hardware around thick soundproofing or uneven door trim will appreciate the renewed single SimpliSafe Entry Sensor, which offers a 2-inch magnet sensing distance and included mounting screws.
- A creator needing a 3-inch contact housing to match wider door jambs or equipment lockers will find a direct fit in the standalone SimpliSafe Entry Sensor wall-mount model.
- A growing production agency securing four separate editing suites economically should select the renewed SimpliSafe Entry Sensor four-pack, providing multi-door protection backed by a 90-day warranty.
- A studio renter or touring creator who frequently relocates gear or rearranges acoustic baffles needs the Replacement Adhesive Pads for SimpliSafe Entry to reposition sensors cleanly without damaging studio walls.
Before You Buy
Before finalizing your studio sensor purchase, review system generation compatibility and missing listing details. The listings indicate compatibility with modern Gen 3 or new-generation SimpliSafe systems, but they do not specify backward compatibility with older legacy generations. In addition, while all sensor models include pre-installed batteries, the listings do not specify the exact operational lifespan in months or years before a battery replacement is required.
Mounting logistics also require consideration in sound-treated spaces. The listings detail adhesive strips and mounting screws, but they do not specify whether the included adhesives bond reliably to porous acoustic foam, fabric wall panels, or textured wood. Furthermore, while the renewed listings verify professional inspection under the Amazon Renewed Guarantee, they do not specify the previous cosmetic wear history of individual refurbished units.
FAQ
Can SimpliSafe door sensors trigger secret alerts without sounding the siren?
Yes, the listings confirm that SimpliSafe entry sensors support Secret Alerts. Instead of sounding a loud base station siren or entry chime, Secret Alerts send a silent notification directly to your phone, tablet, or computer. This allows creators to monitor gear cabinets quietly without interrupting live microphone feeds or streaming sessions.
What is the sensing distance between the sensor and its magnet?
Product listings for the renewed SimpliSafe entry sensors cite an operational sensing distance of up to 2 inches. This generous spacing allows creators to mount sensors across thick acoustic weatherstripping, soundproofing door seals, or uneven studio moldings where flush installation is impossible.
How do you connect a new entry sensor to your SimpliSafe system?
The listings indicate that setup is managed through your SimpliSafe keypad. You mount the sensor in position, open the keypad menu, and select the add device option to pair the unit. Once connected, the base station chimes or announces the sensor name when opened.
Can SimpliSafe entry sensors be permanently mounted with screws?
Yes, the listings note that entry sensors support both peel-and-stick adhesive installation and permanent screw mounting. Hardware options include two mounting screws and an optional mounting plate, allowing creators to anchor sensors firmly into doorframes or gear lockers.
How many entry sensors can one SimpliSafe base station support?
The product listings state that you can connect up to 100 sensors to a new-generation SimpliSafe base station. This high capacity allows production studios and multi-room podcast facilities to secure every exterior door, vocal booth, window, and equipment locker under one central system.
Do replacement adhesive pads leave sticky residue on studio walls?
The listing for the Crvicv replacement adhesive pads confirms that the pre-cut PE foam provides secure bonding with residue-free removal. This allows apartment renters and studio creators to reposition hardware without peeling paint or leaving sticky adhesive on walls when moving.
