As Amazon Associates, we earn from qualifying purchases. This means we may receive a small commission at no extra cost to you if you click through and make a purchase.
A malfunctioning ice maker creates immediate disruption in a busy studio kitchen or workspace, especially when long editing sessions demand a continuous supply of cold refreshments. When your freezer stops dropping cubes, jams repeatedly, or yields undersized pieces, you need to decide whether to install an official factory component or a direct-fit aftermarket assembly. The choice hinges on identifying the exact physical profile for your cabinet, confirming voltage compatibility, and verifying that the replacement addresses drive motor failure or tray cracking. Performing a clear samsung refrigerator ice maker comparison helps clarify whether you need factory-original equipment manufacturer specifications or a DIY-friendly compatible assembly built to match existing cabinet rails and wire harnesses.
Navigating the catalog of replacement components requires understanding how listings organize parts across different appliance generations. Available assemblies split between genuine Samsung factory units and compatible replacement builds from third-party manufacturers. Within this selection, assemblies are identified by distinct part numbers—including DA97-15217D, DA97-07603B, and DA97-19010A—each tied to specific cabinet dimensions, electrical plugs, and ice bin capacities. While some options serve as mechanical replacements that connect to existing wiring, others arrive packaged as kits bundled with dedicated installation tools. Knowing which samsung refrigerator ice maker to buy means verifying your appliance’s interior cabinet layout, checking connector pinouts, and deciding whether you require authentic OEM construction or a practical DIY kit.
This guide by the numbers
9.8/10
Best rated model
Our highest score in this line-up
4
Models on file
Models in this guide that have a stored product record
4
Brands involved
Distinct brand names on the product records used here
Prices and specifications come from the stored Amazon listing data for the products in this article. Scores are out of 10, based on listed specifications and buyer feedback.
Samsung Refrigerator Ice Maker Lineup at a Glance
| Model Name | Manufacturer Type | Replacement Part Numbers | Primary Specifications |
|---|---|---|---|
| Samsung DA97-15217D Refrigerator Ice Maker Assembly | Genuine OEM (Samsung) | DA97-15217A, DA97-15217B, DA97-15335A, DA97-12317A, DA97-12317B | 1 liter capacity, 2400W, 1V, 1x1x1 inch dimensions |
| DA97-07603B Ice Maker Assembly | Compatible Aftermarket (LUOWENWEN) | DA61-03213B, DA97-07603A, DA97-07603B | High-grade materials, 6-month warranty support, DIY plug-and-play |
| DA97-19010A Compatible Replacement Part for Samsung | Compatible Aftermarket (ZANBWGQD) | DA97-19010A, AP6804571, PS12707599, 44961644, ASM814812 | 12V operating voltage, plastic build, 4-step screw mounting |
| DA97-19010A Ice Maker Assembly for Samsung | Compatible Aftermarket (Timsenkoo) | DA97-19010A, AP6804571, PS12707599, EAP12707599 | 5 liters capacity, 12V operation, ABS plastic, includes screwdriver |
The Models in Detail
01
Samsung DA97-15217D Refrigerator Ice Maker Assembly
Samsung DA97-15217D Refrigerator Ice Maker Assembly
Best for: Owners demanding authentic factory OEM components
Pros
- Genuine Samsung OEM replacement
- Replaces five legacy part numbers
- Restores high-volume ice production
Cons
- Listing does not include installation tools
The Samsung DA97-15217D Refrigerator Ice Maker Assembly is an authentic factory-produced unit built directly by Samsung to deliver original equipment performance. As an official piece of hardware, this samsung da97-15217d ice maker serves as a direct factory supersession for legacy part numbers including DA97-15217A, DA97-15217B, DA97-15335A, DA97-12317A, and DA97-12317B. The listing identifies it as a single-item package with a rated capacity of 1 liter, a wattage rating of 2400 watts, a voltage figure of 1, and catalog dimensions of 1 inch deep by 1 inch wide by 1 inch high.
When existing cooling units experience chronic freezing jams or low cube output, installing this genuine assembly restores consistent, high-volume ice production. Because it comes straight from Samsung as a genuine OEM part, it integrates smoothly with native control boards. When servicing a samsung french door refrigerator, matching the internal compartment with an original equipment replacement ensures that harvest cycles operate without connector issues. The package includes the core unit, giving technicians an exact factory swap.
This model suits homeowners who prioritize factory-original integrity and want to maintain authentic equipment tolerances. If your appliance originally came fitted with part numbers DA97-15217A or DA97-12317A, this is your direct replacement. However, for setups requiring the DA97-07603B or DA97-19010A profiles, this assembly gives way to the compatible models designed for those cabinets.
02
DA97-07603B Ice Maker Assembly
DA97-07603B Ice Maker Assembly
Best for: Samsung RF-series French door refrigerator owners
Pros
- Direct replacement for DA97-07603A and DA61-03213B
- Includes six-month return and exchange warranty
- Durable anti-clogging build
Cons
- Hand tools not included in package
The DA97-07603B Ice Maker Assembly, produced by LUOWENWEN, is an aftermarket replacement part engineered for compatibility with Samsung French door refrigerators. The listing specifies that this unit replaces previous component designations DA61-03213B and DA97-07603A, serving as an upgraded da97-07603b ice maker assembly. It provides verified fit for popular appliance models such as RF26HFENDSR, RF28R6241SR, RF260BEAESR, and RF263TEAESR. Built from durable materials, the assembly focuses on eliminating slow harvest cycles and delivering complete, well-shaped ice cubes.
From an installation perspective, this unit is structured for a straightforward DIY procedure requiring you to disconnect electrical power and the water supply before starting. The listing notes that if ice production does not resume immediately, users should check freezer compartment temperature, the water filter, the thermostat, or household water pressure. LUOWENWEN includes a single DA97-07603B assembly and backs the product with a three-month after-sales service policy and a six-month free return and exchange warranty. Unlike maintaining an icee slushie machine, refrigerator ice systems depend strictly on cabinet freezing temperatures and line pressure to fill mold cavities.
This assembly is best suited for DIY owners operating RF-series refrigerators who need a targeted fix for damaged ice trays. It provides direct compatibility for setups requiring the DA97-07603B profile. However, if your refrigerator calls for the DA97-15217D form factor or the newer DA97-19010A side-by-side design, this assembly cannot be used and gives way to those respective models.
03
DA97-19010A Compatible Replacement Part for Samsung
DA97-19010A Compatible Replacement Part for Samsung
Best for: Budget-conscious DIYers fixing RS-series refrigerators
Pros
- Simple four-step installation process
- Standard 12-volt plug-and-play wiring
- Replaces seven common part numbers
Cons
- Requires existing internal freezer mounting bracket
The DA97-19010A Compatible Replacement Part for Samsung, offered by ZANBWGQD, is a model-specific aftermarket replacement tailored for compatible cooling appliances. The listing highlights broad interchangeability, replacing factory numbers DA97-19010A, AP6804571, PS12707599, 44961644, ASM814812, SWAA016B02, and R4D8083-05. Engineered from durable plastic, this 12-volt assembly is built to operate reliably in cold freezer environments. Selecting a da97-19010a replacement part allows owners to resolve absent ice output, small cubes, and trays failing to auto-eject into the storage bin.
Installation requires no electrical modification and follows a simple 4-step DIY process: unplug the refrigerator, remove the old ice maker, align and secure the replacement with screws, and connect the wire harness. Anyone can complete the swap in minutes using standard tools. The listing reminds buyers that this ice maker requires an existing internal water line connection and a factory mounting bracket inside the freezer, as not all refrigerators come pre-equipped for ice maker installation.
This model suits budget-conscious DIYers operating Samsung RS-series units like RS27T5200SG, RS27T5201SR, or RS22T5561SR who want a plug-and-play replacement. It restores full ice harvesting without rewiring. However, because the package does not include tools, users needing an included screwdriver may prefer the alternative DA97-19010A assembly that bundles one in the box.
04
DA97-19010A Ice Maker Assembly for Samsung
DA97-19010A Ice Maker Assembly for Samsung
Best for: DIYers wanting an all-in-one installation kit
Pros
- Includes double-ended screwdriver and manual
- Noise-reduced rapid ice operation
- High 5-liter rated capacity
Cons
- Listing does not include mounting screws
The DA97-19010A Ice Maker Assembly for Samsung, manufactured by Timsenkoo, is an upgraded 12-volt replacement unit featuring a 5-liter capacity rating and bundled installation hardware. Designed to replace factory numbers DA97-19010A, AP6804571, PS12707599, and EAP12707599, this assembly fits various models including RS70H27SDRAA, RS27T5202SR/AA, RS22T5201SG/AA, RS22T5561SR/AA, and RS27T5200SG/AA. Constructed from durable ABS materials, the unit is engineered for long-lasting resilience in freezing conditions.
Installing a complete samsung fridge ice maker assembly resolves appliance issues like noisy operation, slow cube cycles, unresponsive electronics, damaged trays, and zero ice production. The listing emphasizes quiet, rapid ice production with noise-reduced operation that keeps kitchen workspaces peaceful. Timsenkoo packages the assembly with a double-ended screwdriver and an instruction manual, providing the specific hand tool needed to remove cabinet screws and complete installation immediately.
This assembly is ideal for busy households and creators who want a quiet replacement kit that includes the required hand tool in the package. Its noise-reduced operation and bundled screwdriver make it a very convenient DIY project. Conversely, if your appliance uses the earlier DA97-07603B or DA97-15217D mounting footprints, this assembly will not fit and yields to those specialized parts.
Matching a Model to Your Setup
- If you require an authentic factory component that preserves original OEM specifications for your DA97-15217A or DA97-15217B series appliance, select the Samsung DA97-15217D Refrigerator Ice Maker Assembly.
- If you operate an RF-series French door model like the RF26HFENDSR or RF28R6241SR and need to replace an older DA61-03213B or DA97-07603A module with six-month warranty coverage, choose the DA97-07603B Ice Maker Assembly.
- If your side-by-side refrigerator is an RS27T5200SG, RS27T5201SR, or RS22T5561SR model and you want a direct-fit 12-volt plastic replacement using your own household tools, pick the DA97-19010A Compatible Replacement Part for Samsung.
- If you own an RS22 or RS27 series refrigerator, lack a dedicated screwdriver, and want an all-in-one package that includes a double-ended tool and noise-reduced ABS construction, install the DA97-19010A Ice Maker Assembly for Samsung.
- If your current ice maker has suffered a damaged cube tray or motor failure on an AP6804571 setup, choose either the DA97-19010A Compatible Replacement Part for Samsung or the tool-bundled DA97-19010A Ice Maker Assembly for Samsung based on whether you need a screwdriver.
- If you need a unit verified to replace DA97-15335A or DA97-12317B with factory-rated heating specifications, rely on the Samsung DA97-15217D Refrigerator Ice Maker Assembly.
Before You Buy
Before ordering any replacement assembly, careful physical and technical verification is required because ice maker modules are strictly model-dependent rather than universal. Conducting a successful samsung ice maker replacement begins by locating the appliance data plate on the interior cabinet wall or door frame. You must confirm that your specific alphanumeric model number matches the compatibility roster listed by the manufacturer. Additionally, product listings specify that these packages do not include extra mounting brackets, external water supply lines, or replacement water inlet valves. If your freezer is not already plumbed and wired with an active mounting bracket, an ice maker assembly alone cannot function.
Evaluating an oem vs aftermarket samsung ice maker also requires understanding the diagnostic steps that must precede component replacement. Installing a new ice maker will not fix ice shortages if secondary systems are failing. Listings emphasize that users should confirm the freezer maintains proper freezing temperatures, inspect the water filter for blockages, test the thermostat, and check water line pressure. Furthermore, while certain aftermarket options include a screwdriver or return warranty, the listings do not specify spare mounting screws or sealant, meaning you should carefully retain all original mounting hardware removed during disassembly.
FAQ
How do I know which ice maker model number fits my refrigerator?
To determine compatibility, locate your refrigerator model number on the rating label inside the cabinet interior. Cross-reference that model code, as well as the part number stamped on your existing ice maker chassis, against the replacement numbers provided in the product listings. Because these assemblies are model-specific rather than universal, exact alphanumeric matching is essential.
What tools are required for a diy samsung ice maker install?
A typical diy samsung ice maker install requires only basic hand tools, primarily a standard Phillips-head or flat-head screwdriver to loosen bracket screws. One model in our comparison includes a double-ended screwdriver directly in the box along with an instruction manual, whereas the other assemblies require you to supply your own tool. Always disconnect electrical power and shut off the water valve before starting.
Does the ice maker package include water lines and mounting brackets?
No, the product listings specify that these replacement units do not include supplemental water supply tubing or extra cabinet mounting brackets. The packages contain the core ice maker assembly, and select kits include an installation tool or manual. Your refrigerator must already have the internal water feed tube, bracket housing, and wiring harness pre-installed.
What should I check if a newly installed ice maker produces no ice?
If your new ice maker does not begin producing ice after installation, consult the diagnostic checklist highlighted in the listings. You should verify that the freezer has reached proper freezing temperatures, confirm that the water filter is clean, inspect the thermostat, and ensure household water pressure is adequate. Newly installed units can take several hours to cool down and initiate their first harvest cycle.
Can I interchange a DA97-15217D assembly with a DA97-19010A assembly?
No, these assemblies feature completely different mounting dimensions, electrical specifications, and wiring connectors. The DA97-15217D is a factory OEM unit rated with specific cabinet dimensions and wattage parameters, whereas the DA97-19010A is a 12-volt assembly designed for compatible side-by-side models. Interchanging assemblies that do not share direct part number cross-references will result in physical mismatch and electrical failure.
