Proxxon Table Saw Buyer’s Guide: Bench Saws and Blade Matchups

The PROXXON Table Saw FET for Precision is the flagship bench machine for model builders, miniature cabinetmakers, and instrument makers who require repeatable microscopic tolerances. Built with a die-cast aluminum table and housing, the machine measures 13 inches long by 14 inches wide by 8 inches high, delivering a rigid cutting platform powered by a 200-watt corded electric DC motor operating on 110 to 120 volts. Generating a high spindle speed of 7000 rpm, the FET handles diverse workpiece stock including hardwood, non-ferrous metals, and dense thermoplastics. Its signature mechanical highlight is the micro-adjustable longitudinal stop, which features an adjustment screw allowing micro-fine fence positional corrections smaller than 0.004 inches (0.1 millimeters) following initial coarse setting.

Versatility is central to the proxxon table saw fet design, offering both blade height adjustment and a 45-degree blade tilt function. When paired with the integrated angle stop, this tilting shaft assembly allows users to cut double miters seamlessly without requiring secondary squaring fixtures. To assist with wider stock, Proxxon includes an extendable table extension alongside an integrated vacuum adapter port to extract dust directly from the blade housing. The machine comes equipped with an 80mm tungsten-tipped 36-tooth blade, a workpiece pusher, and non-slip rubber feet. Woodworkers evaluating safe material support when guiding narrow strips past the blade often pair these micro fences with a specialized bow push stick for table saw setups to maintain balanced downward pressure during ripping operations.

In workshop practice, this machine suits makers executing fine joinery, architectural framing, and custom scale modeling where compound angles and tight tolerances are mandatory. Its ball-bearinged saw shaft and compound belt drive isolate vibration, preventing cut marks across fragile workpieces. It gives way to the smaller KS 115 only when a creator has zero requirement for bevel cutting and strictly needs an ultra-compact bench slicer for miniature modeling stripwood under a third of an inch thick.

Best for: Crafters cutting miniature stripwood and boards

Pros

• Machined plane aluminum worktable
• Quiet 85-watt motor
• Compact footprint for delicate slicing

Cons

• Fixed 90-degree cutting angle only
• Cutting depth limited to 5/16 inches

Designed explicitly as a compact benchtop slicing unit, the PROXXON Bench Circular Saw KS 115 solves the challenge of handling parts that are simply too minuscule to cut safely on full-size machinery. Powered by a quiet 85-watt, 120-volt motor running at 5000 rpm, this saw provides a dedicated cutting solution for model railroaders, dollhouse builders, and hobbyists working with miniature stock. Its working surface features a machined plane aluminum worktable measuring 6 1/4 inches by 6 1/4 inches (160mm by 160mm), creating a flat platform for sliding small components through the kerf without snagging fragile edges.

The cutting depth of the KS 115 is calibrated specifically for delicate stock, handling wood up to 5/16 inches (8mm), plastics and circuit boards up to 1/8 inches (3mm), and non-ferrous metals up to 1/16 inches (1.5mm). The saw operates with a fixed 90-degree cutting angle and includes one 24-tooth Super Cut saw blade. While some creators attempt to convert rotary hand tools using a dremel portable saw station, the purpose-built aluminum chassis and direct arbor configuration of the KS 115 yield vastly superior squareness when cutting delicate balsa, basswood, and miniature plastic extrusions.

In an editorial proxxon ks 115 vs fet comparison, this model serves as the ideal mini table saw for model making when physical workspace and minimal weight take priority. It requires very little bench space and handles delicate crosscuts without rattling small assemblies. However, it yields priority to the larger FET table saw whenever projects demand stock thicker than 5/16 inches, compound bevel cuts, or ripping wider sheet panels that necessitate an extendable table wing and micro-dial fence adjustments.

Best for: Cutting mixed hardwoods plastics and aluminum

Pros

• Durable 36 carbide-tipped teeth
• Cuts fiberglass composites and aluminum
• Smooth vibration-free operation

Cons

• Wider kerf than thin crosscut discs

The Proxxon 28732 3-9 64-Inch 80mm Carbide tipped blade is the workhorse cutting accessory for Proxxon larger bench saws, engineered specifically to fit the FET, FKS/E, and KGS 80 machines. Featuring an outer diameter of 80mm (3 9/64 inches), a 1.6mm (1/16 inch) kerf thickness, and a 10mm (3/8 inch) arbor bore, this 36-tooth disc delivers exceptional rigidity during continuous cutting cycles. Proxxon built this blade to maintain quiet, precise, and vibration-free operation, allowing users to make prolonged production cuts in miniature stock without encountering motor resonance or edge chatter.

Where this carbide-tipped geometry excels is in processing mixed, abrasive, and dense sheet materials that would quickly dull standard steel teeth. The listing rates the proxxon 28732 carbide blade for clean cutting performance in balsa wood, plywood, softwood, hardwood, polycarbonate, structural plastics, aluminum, and glass-fiber reinforced plastics (GRP). The 36 carbide-faced teeth slice cleanly through resin binders and layered plies, leaving smooth edges that reduce follow-up sanding. Crafters managing narrow ripping cuts often use specialized anti-kickback splitters like a microjig splitter for table saw setups on larger benches to protect fine workpieces from pinching behind the blade.

Makers should select this blade when their work involves frequent transitions between natural hardwoods, acrylics, and structural composite panels. Its robust tooth brazing resists thermal distortion and wear from abrasive composite substrates. However, if your cutting queue consists exclusively of paper-thin veneers or brittle miniature moldings requiring an ultra-narrow cut width with minimal kerf waste, the higher-tooth 28731 Super Cut blade provides a cleaner, lower-resistance path.

Best for: Splinter-free crosscuts in thin wood moldings

Pros

• Ultra-thin 0.5mm plate thickness
• Dense 80-tooth rim prevents tearout
• Minimal rotational resistance

Cons

• Not suited for abrasive fiberglass composites

Delivering maximum tooth density for glass-smooth end grain and fine joinery, the Proxxon 28731 85mm Crosscut Saw Blade is a specialized Super Cut accessory engineered for the Proxxon FET, FKS/E, and KGS 80 machinery. Measuring 85mm (3 11/32 inches) in diameter with a standard 10mm (13/32 inch) arbor bore, this blade features an impressive 80 finely pitched teeth. What sets this disc apart in high-precision miniature craft is its ultra-thin plate thickness of only 0.5mm (1/64 inch), which significantly reduces rotational resistance against the drive motor and minimizes material waste to negligible levels.

The primary listing specifications designate this 80-tooth crosscut blade for clean parting cuts in both hard and soft woods as well as delicate plastic moldings. Because the kerf is merely 0.02 inches wide, the blade removes very little wood fiber per pass, virtually eliminating the tearout, blowout, and feathering common on the backside of tiny wooden profiles. Weighing just 27.22 grams, the lightweight disc spins smoothly up to full operating speed, enabling clean miter joints and crosscuts across ship model frames, dollhouse architectural moldings, and delicate craft projects.

The proxxon 28731 crosscut blade is the quintessential match for creators working with fine hardwoods, thin craft veneers, and fragile styrene profiles where every fraction of a millimeter counts. The high tooth count glides through delicate fibers without catching or throwing thin cutoffs. However, users should reserve this blade primarily for crosscutting and light ripping in non-abrasive stock; when facing thick longitudinal rips, fiberglass sheets, or non-ferrous aluminum bars, the heavier-gauge 28732 carbide blade is the required choice to avoid blade binding or tooth overheating.

Best for: Abrasive cutting of ceramics and circuit boards

Pros

• Continuous class D107 diamond rim
• Cuts porcelain stone and circuit boards
• Direct fit for KS 115 saw

Cons

• Incompatible with natural woods and soft metals

Specifically manufactured to expand the material versatility of the KS 115 bench circular saw, the Proxxon 28012 2-Inch Diamond Blade transforms the miniature wood saw into a precision abrasive cutting station. Measuring exactly 2 inches (50mm) in diameter with a 10mm arbor hole, this specialized wheel is coated with a continuous 0.5mm (1/64 inch) layer of class D107 industrial diamond grit. Rather than cutting via sharp shearing teeth, the continuous abrasive diamond matrix grinds away ultra-hard, brittle materials that would instantly destroy conventional toothed blades.

The listing outlines an explicit range of hard-surface applications for the proxxon 28012 diamond blade, including ceramics, porcelain, tiles, stone, fiberglass sheets, and electrical circuit boards. Electronics hobbyists and prototype developers frequently utilize this disc to score and trim copper-clad FR4 printed circuit boards cleanly without delaminating the internal woven fiberglass substrate or chipping edge traces. Similarly, mosaic artists and miniature architectural modelers rely on the continuous diamond rim to slice miniature ceramic tiles and stone slabs smoothly at right angles on the KS 115 table.

This diamond blade is an indispensable consumable for anyone cutting masonry, tiles, and fiberglass substrates on the bench circular saw KS 115. Its rigid steel core and diamond rim resist flex, keeping narrow kerf channels straight and crisp. Nevertheless, it is strictly an abrasive cutter meant for hard, brittle media; it should never be used on softwoods, balsa, or ductile non-ferrous metals, where soft fibers would quickly clog the diamond matrix—tasks best left to Proxxon toothed steel or carbide blades.