Lutron Paddle Switch Guide: Comparing Claro, Diva, and Sunnata

Best for: Studio owners outfitting multiple standard on/off circuits

Pros

• 15-amp current rating
• 15-minute quick installation
• Convenient 6-pack bundle

Cons

• No dimming slider
• Single-pole circuits only

The Lutron Claro 15 Amp Single-Pole Paddle is a standard mechanical wall control designed for dedicated on/off switching on 120-volt lines. Operating as a single-pole switch, it controls a lighting circuit from one wall location using screw terminal connections and a two-position push-button touch actuator. As a lutron single pole paddle switch, it carries a full 15-amp rating, making it capable of handling general overhead lighting, exhaust fans, or utility shop loads where dimming is unnecessary. The manufacturer listing notes that installation takes as little as 15 minutes, fitting cleanly into standard decorator-style wall openings.

This six-pack bundle (model CA-1PS-WH in white) suits creators, studio builders, or renovators outfitting multiple rooms with uniform mechanical controls. Because it does not feature dimming circuitry or multi-location travelers, it provides a clean, tactile click for utility closets, production gear storage, or overhead workshop banks. When your lighting requires variable brightness levels or multi-point wall control, this model gives way to the Diva dimmer or multi-way Claro switches.

Best for: Creators upgrading two rooms with matching wallplates

Pros

• Includes two dimmers and two wallplates
• Over 250 lighting levels
• No neutral wire required

Cons

• 150-watt LED capacity ceiling
• Not compatible with digital accessories

Best for: Creators needing smooth, flicker-free LED dimming control

Pros

• No neutral wire required
• Discreet slide control with trim lever
• Supports single-pole and 3-way setups

Cons

• 150-watt LED load limit
• Wallplate sold separately

The Lutron Diva LED+ Dimmer Switch provides specialized lighting control by combining a traditional designer paddle with a discreet, adjacent slide control. Engineered as a lutron diva paddle dimmer, this unit supports up to 150 watts of dimmable LED or CFL bulbs, or up to 600 watts of incandescent and halogen loads on 120-volt circuits. It features an integrated trim lever to fine-tune low-end dimming performance, helping to eliminate flicker, buzz, and delayed start-up. The switch is rated for 1.25 amps and operates in temperatures down to 32 degrees Fahrenheit, making it a reliable solution for residential living spaces and creator studios.

For versatile wiring, this switch supports both single-pole installations and 3-way circuits paired with a Claro switch. Because it requires no neutral wire, it installs easily in older homes or newer builds alike. This model is ideal for video creators and photographers who need precise brightness control to dial in ambient background levels or balance key lights without rewiring. If you are comparing lutron claro vs diva, the Diva is the clear choice when variable lighting output is needed, whereas standard Claro switches remain strictly binary on/off controls. Those needing a lutron 3 way switch configuration can pair this dimmer directly with an existing mechanical toggle or Claro companion.

Best for: Multi-location spaces pairing with Sunnata dimmers

Pros

• Up to 10 switch locations
• Fade-to-off delay feature
• Includes coordinating wallplate

Cons

• Not for standalone use
• Requires separate Sunnata dimmer

The Lutron Sunnata On Off Accessory Switch (model ST-ASW-WH) is a digital companion control explicitly designed for multi-location installations. The listing emphasizes that this unit is not for standalone use; it must be paired with a primary Sunnata LED+ dimmer (model STCL-153MH-WH or STCL-153MW-WH, sold separately). As a lutron sunnata accessory switch, it expands control across 3-way and multi-location setups, enabling up to 10 control locations when combining one primary dimmer with up to nine accessory units. It operates on 120 volts with a 1.25-amp rating, using clamp connectors and through-hole terminals.

This accessory switch delivers advanced touch-control interaction: a single tap recalls your favorite preset brightness level, a double tap jumps instantly to full brightness, and holding the paddle triggers a 30-second delayed fade-to-off. Lights smoothly fade on and fade off to allow your eyes to adjust comfortably. It works in homes of any age because it requires no neutral wire, and it comes packaged with a coordinating wallplate. This unit is intended for expansive creative spaces, long hallways, or multi-door studios where you want consistent digital aesthetic and remote switching. If you do not have a compatible Sunnata dimmer, this switch cannot operate.

Best for: Workshop renovations needing bulk mechanical switches

Pros

• 12-pack bulk value
• Robust 15-amp rating
• Installs in 15 minutes

Cons

• No dimming capabilities
• 1-way single-pole only

The Lutron FM-12120M White Claro On Off provides a contractor-sized 12-pack of single-pole paddle switches under model CA-1PS-WH. Built for standard 120-volt circuits with a 15-amp capacity, each switch utilizes a two-position rocker actuator with physical screw terminals for straightforward pole mounting. The listing highlights an installation time of as little as 15 minutes per unit. This lutron claro paddle switch matches standard decorator wallplates, offering smooth, quiet actuation for high-traffic environments.

This bulk package is tailored for extensive studio renovations, workshop build-outs, or commercial office setups where you need reliable, mechanical on/off switching at scale. In spaces where heavy machinery such as an electric dewalt grinder shares branch panels, keeping high-capacity 15-amp mechanical switches on dedicated lighting lines ensures dependable operation without delicate digital microcontrollers. When a circuit demands variable light levels, multi-switch travelers, or remote control, this bulk Claro package gives way to the Diva dimmer or Sunnata series.

The Lutron Diva LED+ Dimmer Switch & package includes two complete Diva LED+ dimmer switches along with two coordinating Claro wallplates. Each dimmer features a large rocker paddle to turn lights on or off to a preset level, alongside a discreet slider providing over 250 lighting levels. Designed to handle up to 150 watts of dimmable LED/CFL bulbs or 600 watts of incandescent/halogen lighting on 120-volt lines, the unit requires no neutral wire for installation. The listing notes screw terminal connectors, 3-way circuit compatibility with a mechanical switch, and a lower temperature rating of 1 degree Fahrenheit.

This dual-pack is well-suited for creators setting up two separate lighting zones, such as an editing suite and an adjacent shooting bay, where matching aesthetics and wallplates are needed out of the box. While smart desk accessories or a switchbot remote control can automate peripheral gadgets, hardwired wall dimming provides unmatched physical reliability. If your installation requires multi-location control across three or more wall boxes, this 3-way dimmer must be combined with standard 3-way and 4-way switches rather than digital companion accessories.

Best for: Large studios with three-switch lighting circuits

Pros

• 4-way multi-switch compatibility
• Full 15-amp load rating
• Satin Snow designer finish

Cons

• Wallplate sold separately
• No integrated dimming function

The Lutron Claro Satin Colors 15 Amp switch (model SC-4PS-SW in Snow) is engineered specifically for 4-way electrical circuits where a light fixture is controlled from three separate wall switches. Rated for 15 amps at 120 volts, it features a large, smooth push-button paddle actuator with clamp connector screw terminals. As a lutron 4-way paddle switch, it drops into standard decorator-style wall openings and pairs naturally with existing Claro or Diva controls. The listing indicates installation can be completed in as little as 15 minutes, though the coordinating wallplate is sold separately.

This model is built for large, open-concept spaces, production stages, or multi-entrance studios requiring intermediate circuit switching between two 3-way controls. It handles any 15-amp lighting or fan load, making it versatile for general illumination or ventilation circuits. Where dimming is needed directly at the switch, this 4-way mechanical unit gives way to a Diva dimmer placed at one of the flanking 3-way positions.