As Amazon Associates, we earn from qualifying purchases. This means we may receive a small commission at no extra cost to you if you click through and make a purchase.
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
In this hollywood racks hollywood RV rider hitch review, we look at the RV Rider, a hitch-mounted bike carrier built for heavy electric bikes. It holds two e-bikes, supporting up to 80 pounds each. The rack fits 2-inch hitch receivers and accommodates fat tires up to 5 inches wide. It features locking frame grabbers and a tilt-down design for cargo access. This setup is engineered specifically for RVs and fifth wheels, ensuring secure transport for your heavy gear on the road.
- Holds 2 e-bikes at 80 lbs each
- Fits tires up to 5 inches wide
- Locking frame grabbers secure bikes firmly
- Tilt-down design aids rear access
- Requires 2-inch Class 3 hitch receiver
Good fit for
You should choose this rack if you tow an RV, fifth wheel, or flat-towed vehicle and own two heavy e-bikes. The 160-pound total capacity and wide wheel holders handle fat tires well. The locking grabbers and hitch pin provide security for expensive bikes. If you need easy access to your rear cargo area, the tilt-down feature is practical. This is a solid choice for RV travelers who prioritize stability and weight capacity.
Who can skip it
Skip this model if you own a travel trailer, as it is not approved for that use. You also need a 2-inch Class 3 hitch receiver; smaller receivers will not work. If you carry more than two bikes, this rack lacks the capacity. Buyers looking for a lighter, portable option might find the 56-pound weight too cumbersome. Additionally, if you need vertical stacking to save space, this rack’s horizontal layout may not fit your storage needs.
Verdict
The Hollywood RV Rider is a robust, spec-driven solution for transporting two heavy e-bikes on RVs. Its high weight capacity and secure locking features make it a reliable choice for serious travelers.
Hollywood RV Rider Key Specs
Weight Capacity: 80 lbs each, 160 lbs total
This rating allows you to carry two heavy electric bikes safely. You can load bikes weighing up to 80 pounds each onto the rack. The total combined weight must not exceed 160 pounds. This capacity ensures the hitch mount and frame remain stable during transit. It is suitable for most standard and mid-weight e-bikes on the market today.
Max Tire Width: Up to 5"
The wheel holders accommodate tires up to five inches wide. This specification is crucial if you ride fat-tire electric bikes. Standard narrow tires will also fit securely within these holders. You do not need to worry about clearance issues with wider tread. This feature makes the rack versatile for various e-bike tire sizes.
Bike Capacity: 2
The rack is designed to hold exactly two bicycles at once. You can transport a pair of e-bikes simultaneously without overloading the system. This capacity is ideal for couples or friends traveling together. It maximizes the utility of the hitch receiver while maintaining a manageable profile. You cannot add a third bike to this specific model.
Frame Contact: Locking frame grabbers
The rack secures your e-bikes by gripping the frame or seat tube. Locking mechanisms prevent the bikes from shifting or falling off during movement. This method is generally safer than wheel-only hooks for heavy electric bikes. It protects the wheels from damage while ensuring the bikes stay upright. You should verify your frame tube diameter fits the grabber range.
Receiver Size: 2"
This rack requires a two-inch trailer hitch receiver on your vehicle. You must check your RV or vehicle hitch size before purchase. It is not compatible with one-inch receivers commonly found on cars. A minimum Class 3 hitch is recommended for stability. This standard size ensures a robust connection for heavy loads.
Design and Build Quality
The Hollywood RV Rider is built for heavy loads. The listing states a total weight capacity of 160 pounds. Each bike can weigh up to 80 pounds. This supports standard and fat tires up to 5 inches wide. You can transport robust electric bikes without concern. The rack uses locking frame grabbers. These secure the bike by the frame or seat tube. They fit tubes from 1 to 2 inches in diameter. This provides a stable hold during travel.
The unit measures 39 inches in length. It is 20 inches wide and 9 inches tall. The rack itself weighs 56 pounds. It is finished in black. This color helps it blend with most vehicles. The design fits a 2-inch hitch receiver. You need a minimum Class 3 trailer hitch. The listing includes a hitch tightener. This helps reduce rack movement for a stable connection.
The rack folds against the vehicle when empty. This creates a more compact profile. With bikes removed, it tilts down. This allows easier access to rear cargo. A 10-inch space sits between bikes. This provides additional clearance during transport. The design is engineered for RV motorhomes. It also works with fifth wheels and flat-towed vehicles. It is not approved for travel trailers. This layout suits owners who need secure, heavy-duty transport for multiple e-bikes.
Setup and Everyday Use Guide
You install this rack into a Class 3 trailer hitch with a 2-inch receiver. The listing specifies a minimum Class 3 requirement. You insert the hitch pin to secure the unit. The included hitch tightener helps reduce movement during transit. This step ensures a stable connection for the heavy loads you plan to carry. The rack itself weighs 56 pounds. You handle this weight during initial installation. Once mounted, you load your electric bikes. The locking frame grabbers secure the bikes by the frame or seat tube. These grabbers accommodate tubes between 1 and 2 inches in diameter. You place the wheels into the heavy-duty wheel holders. The ratchet straps hold the tires in place. This setup supports fat tires up to 5 inches wide. You can transport two bikes with a 10-inch gap between them. This clearance helps prevent contact during travel. When you arrive at your destination, you remove the bikes. The rack tilts down to allow easier access to your rear cargo area. This feature works when no bikes are on the rack. You can also fold the rack against the vehicle for a more compact profile. This saves space when you are not transporting bicycles. The design includes a locking hitch pin and an 8-foot security cable. These items help secure both the rack and the bikes while you are parked. You do not need to worry about travel trailers, as this model is not approved for them. It is engineered specifically for RV motorhomes, fifth wheels, and flat-towed vehicles. This ensures you use the product within its intended safety parameters.
Check Compatibility And Needs
Before you buy the Hollywood RV Rider, verify your vehicle’s hitch class. This rack requires a minimum Class 3 hitch with a 2-inch receiver. Using it on a smaller hitch risks damage or failure. Check your RV or fifth-wheel compatibility. The design is approved for motorhomes and flat-towed vehicles, but not for travel trailers. Ensure your e-bikes fit the frame grabbers. Tubes must be between 1 and 2 inches in diameter. Fat tires up to 5 inches wide are supported. You should also consider your rear cargo access needs. The tilt-down feature helps, but only when bikes are removed. Keep the locking hitch pin and 8-foot cable secure. Regularly check the ratchet straps and hitch tightener for wear. This rack sits alongside other heavy-duty options in the 1 products listed. It suits users prioritizing stability for high-weight e-bikes over compact storage. If you need a lighter, more versatile rack for daily car use, look elsewhere. This unit is built for specific RV and heavy-duty transport scenarios. Read the manual for weight distribution guidelines to ensure safe towing. Proper maintenance extends the life of the black powder-coated finish.
Check before you buy
- Verify your hitch is Class 3 or higher with a 2-inch receiver.
- Confirm your RV or vehicle type is approved for this rack.
- Ensure e-bike frame tubes fit between 1 and 2 inches in diameter.
- Check that fat tires do not exceed 5 inches in width.
Hollywood RV Rider 2 Bike Rack
Best for: RV owners transporting two heavy e-bikes
- Weight Capacity
- 80 lbs each, 160 lbs total
- Bike Capacity
- 2
- Receiver Size
- 2"
- Max Tire Width
- Up to 5"
- Tilt Feature
- Tilt-down
- Frame Contact
- Locking frame grabbers
The Hollywood RV Rider (HR1700) is a hitch-mounted rack built for two electric bikes up to 80 lbs each. It fits 2-inch receivers and supports fat tires up to 5 inches wide. The design tilts down for cargo access and folds when empty. It includes locking frame grabbers and a hitch tightener for stability. This rack suits RV owners needing secure transport for heavy e-bikes.
- Supports 80 lbs per bike with a 160 lb total capacity
- Accommodates fat tires up to 5 inches wide
- Tilt-down design allows rear cargo access
- Includes locking frame grabbers and hitch pin
- Heavier build at 56 pounds
- Limited to a 2-bike capacity
- Requires a minimum Class 3 hitch receiver
- You need to transport two heavy e-bikes on an RV
- You have a 2-inch hitch receiver available
- You require a rack that tilts down for easy access
- You only need to carry one bike
- You have a travel trailer instead of an RV
- You lack a Class 3 hitch receiver
Verdict: Hollywood RV Rider 2-Bike E-Bike Rack is a solid choice for RV owners who need to haul two heavy e-bikes securely. It offers ample weight capacity and stable locking features for fat tires.
Specifications side by side
| Spec | Hollywood RV Rider 2 Bike Rack |
|---|---|
| Weight Capacity | 80 lbs each, 160 lbs total |
| Bike Capacity | 2 |
| Receiver Size | 2" |
| Max Tire Width | Up to 5" |
| Tilt Feature | Tilt-down |
| Frame Contact | Locking frame grabbers |
| Bike Type | Fat Tire |
| Color | Black |
| Tire Type | Fat Tires |
| Vehicle Compatibility | RV |
| Dimensions | 39 × 20 × 9 inches |
| Weight | 56 pounds |
| Size | 2" Hitch |
| Model | HR1700 |
Frequently asked questions
Does the Hollywood RV Rider fit all RVs?
Yes, it is designed for RVs. The product attributes list vehicle compatibility as RV. You can use it on RVs that have the required hitch receiver. Ensure your RV has a 2-inch Class 3 hitch before purchasing. It is not compatible with smaller hitch sizes.
What is the weight of the rack itself?
The rack weighs 56 pounds. This is the total weight of the unit. You need to account for this weight when loading your vehicle. The rack is made of steel for durability. It is not a lightweight aluminum model.
How wide are the tires the rack can hold?
It holds fat tires up to 5 inches wide. The design accommodates these wider tires securely. You can transport standard tires as well. The cradles are adjustable to fit different tire widths. This makes it versatile for various e-bike models.
What dimensions should I expect for storage?
The rack measures 39 inches in length, 20 inches in width, and 9 inches in height. These dimensions affect how much space it takes up. You should check your garage or storage area. The length extends significantly from the hitch.
Is the rack compatible with fat tire e-bikes?
Yes, it is built for fat tire bikes. The product attributes specify fat tire compatibility. It supports tires up to 5 inches wide. This makes it ideal for heavy e-bikes. You can transport two fat tire bikes safely.
What hitch size does this rack require?
It requires a 2-inch hitch receiver. The specs list the size as 2 inches. You must have a Class 3 hitch or higher. Smaller hitches will not work. Verify your vehicle’s hitch size before buying.
How many bikes can this rack carry?
It carries two bikes. The bike capacity is listed as 2 bikes. Each bike can weigh up to 80 pounds. The total weight limit is 160 pounds. This is suitable for couples or families with two e-bikes.



