Agri-Fab Leaf Vac & Tow-Behind System Guide

Best for: Large open turf leaf and grass collection

Pros

• 32 cu ft debris capacity
• 208cc LCT engine
• Vented hard-top dust reduction

Cons

• Lacks branch chipping capability
• Heavy 284-pound empty footprint

The Agri-Fab Hard Top Mow-N-Vac Tow Behind serves as a complete, dedicated collection platform engineered for sweeping vast expanses of open turf. Identified by model number agri fab 45-0631, this machine pairs a heavy-duty steel-frame trailer with a 208cc LCT gas engine that generates internal airflow speeds up to 80 MPH. The collection hopper provides an immense 32 cubic feet or 26 bushels of holding volume, slashing the frequency of offloading runs during peak fall cleanup. It features a vented hard-top design intended to suppress airborne dust and exhaust clean air downward while the operator remains seated. Ground transport is stabilized by 15-inch by 6-inch turf-tread pneumatic tires that preserve turf integrity while carrying a machine with an empty weight of 284 pounds.

This tow-behind vacuum is matched to property managers operating lawn tractors or zero-turn mowers equipped with cutting decks up to 54 inches wide. Included templates facilitate custom deck boot trimming, while the manufacturer includes zero-turn hose accommodation to maintain proper swing geometry during sharp pivot maneuvers. While it excels at ingesting heavy grass clippings, pine cones, and dry leaves, this model does not include a chipping mechanism. Operators handling regular branch cleanup will find it reaches its operational limit when sticks exceed what mower blades can safely mulch, at which point the chipper-equipped trailer models become the preferred alternative.

For large perimeter boundaries where riding equipment cannot maneuver, ground crews often pre-blow debris toward collection paths using a dewalt blower 60v to form uniform windrows for the vacuum intake. The 45-0631 listing specifies a 3-year limited warranty and US manufacturing origin in Sullivan, Illinois, incorporating global materials to ensure long-term chassis durability.

Best for: Restoring worn hard top collector sealing boots

Pros

• Tough composite tear-resistant material
• Direct fit for 48133 part number
• Broad compatibility with older models

Cons

• Retaining brackets and rivets not included

The Leaf Vac Parts 48133 for Agri-Fab represents an essential maintenance component engineered to maintain positive air seals within the collection hopper assembly. Known commonly as the agri fab 48133 boot, this molded replacement junction attaches directly between the primary intake delivery pipe and the trailer hard top hood. Fabricated from a high-strength composite polymer, the boot resists corrosion from acidic grass saps and prevents tearing under persistent chassis vibrations. By keeping the intake line sealed against the collection box, it stops debris backflow, reduces rogue grass scattering across cleared turf, and restores optimal vacuum draw.

This boot specifically targets owners maintaining seasoned Agri-Fab collection trailers whose original rubber or plastic boots have dry-rotted or cracked over seasons of sun exposure. The listing details extensive compatibility across older and legacy systems, including collection cart models 45-0540, 45-05401, 501885, 501886, 551889 series (including revisions A, B, and C), 552493, 501887, and tractor attachment series 190-217D-100 through 190-217F-100. It also fits early chip-n-vac models like 502492 and 50249. Measuring 11.5 inches in all three dimensions with an ultralight 5-ounce weight, it slips directly into factory mounting configurations.

Prospective buyers should take note of component limitations outlined in the listing facts: the replacement unit consists strictly of the molded composite boot. It does not include replacement metal retaining brackets or installation rivets, requiring operators to reuse their existing trailer hardware or source suitable fasteners separately during the overhaul.

Best for: All-weather duct replacement on standard hitches

Pros

• Extends up to 86.2 inches
• All-season weather-resistant construction
• Straightforward cut-to-fit sizing

Cons

• Shipped tightly compressed requiring firm stretching

Best for: Clear line visual monitoring during collection

Pros

• Transparent PVC shows debris clogs
• Integrated steel wire structure
• Includes bonus gloves and bags

Cons

• Requires full manual pre-stretching

The 69860 Lawn Vacuum Hose 84″ Length provides a rugged, highly functional airflow corridor between the tractor deck adapter and the vacuum impeller inlet. Replicating original part numbers 69860 and 41882, this agri fab 69860 hose configuration measures 6 inches in diameter and stretches to a maximum working length of 84 inches. Constructed from transparent polyvinyl chloride (PVC) supported by an integrated high-tensile steel wire helix, the hose prevents wall collapse under heavy negative pressure while giving operators direct visual confirmation of material flow across the suction channel.

This flexible duct serves owners of Agri-Fab Mow-N-Vacs and Chip-N-Vacs, including system model numbers 45-0577, 45-0578, and 45-0567. The clear PVC design proves exceptionally advantageous when vacuuming moist pine straw or dense deciduous leaves, as operators can instantly spot internal clogs before material backs up into the mower deck chute. At 8.8 pounds, the hose balances structural resistance against tight bending flexibility, allowing it to navigate the articulating hitch movements of zero-turn mowers without pinching shut. The listing notes that the hose arrives compressed and should be fully stretched prior to setup, with the PVC material easily trimmed using standard hand tools to achieve a tailored fit on shorter tractor hitches.

In addition to the steel-reinforced duct, the listing notes the inclusion of work gloves and supplementary leaf bags, offering useful utility items right out of the box for seasonal system maintenance.

Best for: Zero-turn mowers needing extra hose flexibility

Pros

• Generous cut-to-length material allowance
• Flexible rubberized construction
• Direct replacement for 69860 and 41882

Cons

• Opaque material prevents visual clog checks

The 69860 Leaf Vac Hose Replacemen Agri presents a durable, opaque alternative for replacing damaged or weathered transfer lines on tractor-pulled collection rigs. Engineered to replace factory part references 69860 and 41882, this 6-inch diameter hose extends out to 84 inches of maximum elongation. Molded from heavy-duty black flexible plastic or rubber compound, it delivers enhanced UV resistance and abrasion protection when rubbing against metal trailer hitches or dragging over low-hanging brush during tight perimeter mowing passes.

This ducting is tailored for hobbyists and landscapers operating agri fab mow n vac or chip-and-vac machinery across zero-turn platforms where hitch articulation demands extra hose slack. The listing highlights that the flexible material includes generous length tolerances, providing roughly 3.2 feet of additional stretch capability beyond baseline dimensions to ensure users never run short of material when routing complex bends around rear engine guards. Compatible explicitly with model series 45-0577, 45-0578, and 45-0567, it restores full suction velocity across the deck adapter interface to preserve an efficient grass and leaf collection cycle.

Weighing approximately 2.65 kilograms, this black rubberized duct handles repeated sharp-radius bends without cracking. Because the material is fully opaque, it concedes the visual troubleshooting convenience of clear PVC hoses, making it better suited for properties with dry, predictable leaf fall where moisture-induced clogs are rare.

The 69860 Lawn Vacuum Hose Replacement Compatible offers an extended-reach gray replacement conduit intended to restore proper airflow across heavy-use tow-behind systems. Engineered as a direct fit for Agri-Fab part numbers 69860 and 41882, this flexible duct maintains a standard 6-inch internal diameter while stretching out to an expanded length of 86.2 inches. Fabricated from resilient industrial polymers, the hose is designed to endure punishing outdoor elements ranging from intense midday heat to freezing autumn storage conditions without turning brittle.

This unit is suited for operators running Agri-Fab Mow-N-Vac models 45-0567 and 45-0577, alongside Chip-N-Vac model 45-0578, particularly those towing with extended rear hitches or wide zero-turn configurations. The extra two-plus inches of extension over standard 84-inch hoses provides critical relief during maximum-angle maneuvers, preventing the hose ends from pulling free of the deck boot or trailer inlet collar. The flexible carcass can be trimmed with utility cutters to eliminate interior drag if a shorter span is required by a compact tractor setup.

The listing stresses that the product is shipped in a tightly compressed package to optimize transport dimensions. Operators must firmly stretch the accordion ribs across their entire length before attempting to measure, cut, or slide the cuffs over tractor discharge adapters.

Best for: Properties with thick tree canopy and branches

Pros

• Integrated 2-inch wood chipper
• Generous 10.5-foot clear intake hose
• 75 percent pre-assembled from factory

Cons

• Substantial 375-pound overall towing weight

The Agri-Fab Chip-N-Vac Collection System represents the flagship hybrid maintenance platform in the Agri-Fab tow-behind lineup. Cataloged under model number agri fab 45-0632, this heavy-duty system integrates a high-velocity leaf vacuum with a dedicated gravity-fed wood chipper mounted directly to the trailer tongue. Powered by an onboard gas engine delivering up to 80 MPH intake velocity, the dual-action impeller mechanism pulls turf debris through the deck boot while the hardened chipper knives process fallen branches and limbs up to 2 inches in diameter into dense wood mulch. All processed material discharges directly into the massive 32 cubic foot (26 bushel or 300 gallon) hard-top trailer box.

Designed for large properties with extensive mature tree cover, the agri fab chip n vac accommodates riding tractors and zero-turn mowers sporting cutting decks up to 54 inches wide. Included cutting templates allow precise fitting of the tractor deck adapter, while an included 10.5-foot clear intake hose measuring 6 inches in diameter ensures maximum maneuverability around trees without binding. The vented hard-top roof directs exhaust air downward to maintain visibility and limit operator dust exposure. At an empty weight of 375 pounds, the steel-and-poly composite construction provides exceptional rigidity under severe hauling conditions, supported by a chassis that arrives 75 percent pre-assembled from the Sullivan, Illinois factory to accelerate initial deployment.

Compared to the standard Mow-N-Vac, this unit eliminates the secondary task of walking properties to pick up fallen sticks before mowing. When managing clearing operations, handheld tools like an 18 v milwaukee blower can quickly corral scattered yard debris toward the chipping chute. Because the integrated chipper and steel framework add roughly 91 pounds over standard vacuums, operators must ensure their towing machine possesses adequate horsepower and braking capacity to manage the combined weight when the 32-bushel hopper is packed with dense, chipped wood.